Nova Emulsion (50% Solids)

Nova Emulsion (50% Solids)

  • Product SKU: NOVA-GL
Hurry! only 0 left in stock!

NOVA is a fast exposing and high solid one part, SBQ, emulsion that is pre-sensitized photopolymer. It offers durability and excellent image, due to its high solids. NOVA yields a smooth even coat, sharp edges and good resolution. As NOVA is based on SBQ technology, it does not require diazo & should only be handled in yellow light. NOVA saves time as it cures very fast and is easily reclaimed. One of the best edge definition and resolution producing emulsion in the industry. 

  • Ideal for both textile and graphic printing by adding diazo. NOVA may be used for Discharge Ink Printing and for Non-PVC Ink.
  • High solids yield thicker stencil
  • No pinholes after exposure and washing
  • Image does not break down if exposed right
  • Easy reclaiming
  • Resists humidity
  • Offers great scrub resistance and gives a long run- Lot more shirts printing per screen

 

COLOR: LAVENDER/BLUE

VISCOSITY: 9,000/10,000 CPS @72F- BROOKFIELD VISCOMETER

SOLIDS: 50%

PH 5.5

SOLUBILITY: WATER

EXPOSURE: Distance for the exposure should be about one and a half times the diagonal measurement of the artwork from point light sources. Yellow & orange mesh requires at least 50% more time than white mesh. The times given below are based on white mesh approximately 5 inches. 

  • METAL HALIDE: 25 SECONDS 3000 WATTS
  • CARBON ARC 20 SECONDS 60 AMPS
  • FLUOR. TUBES 35 SECONDS 160 WATTS

    AVOID FROM FREEZING

    * Images are for reference only, actual product may vary.

    NOVA is a fast exposing and high solid one part, SBQ, emulsion that is pre-sensitized photopolymer. It offers durability and excellent image, due to its high solids. NOVA yields a smooth even coat, sharp edges and good resolution. As NOVA is based on SBQ technology, it does not require diazo & should only be handled in yellow light. NOVA saves time as it cures very fast and is easily reclaimed. One of the best edge definition and resolution producing emulsion in the industry. 

    • Ideal for both textile and graphic printing by adding diazo. NOVA may be used for Discharge Ink Printing and for Non-PVC Ink.
    • High solids yield thicker stencil
    • No pinholes after exposure and washing
    • Image does not break down if exposed right
    • Easy reclaiming
    • Resists humidity
    • Offers great scrub resistance and gives a long run- Lot more shirts printing per screen

     

    COLOR: LAVENDER/BLUE

    VISCOSITY: 9,000/10,000 CPS @72F- BROOKFIELD VISCOMETER

    SOLIDS: 50%

    PH 5.5

    SOLUBILITY: WATER

    EXPOSURE: Distance for the exposure should be about one and a half times the diagonal measurement of the artwork from point light sources. Yellow & orange mesh requires at least 50% more time than white mesh. The times given below are based on white mesh approximately 5 inches. 

    • METAL HALIDE: 25 SECONDS 3000 WATTS
    • CARBON ARC 20 SECONDS 60 AMPS
    • FLUOR. TUBES 35 SECONDS 160 WATTS

      AVOID FROM FREEZING

      * Images are for reference only, actual product may vary.